I got CTR back then and it got my 3700x to 4.375 which I never was able to even HIT on my own or with PBO. All youtube videos seemed to be too specific to motherboard manufacture and BIOS tools, that were never the same as my Gigabyte (Aorus Elite Wifi). I attempted overclocking on my own with my old 3700x, but just couldn't get it down. I have implemented a system that analyzes the state of the sensor.Īnd available in a few hours for Patreon subscribers! up everyone? I have been using CTR 2.1 for a few months. At this point, the user may see an abnormal temperature, frequency, or voltage value. There are situations when a sensor stops responding. I believe that some users may ignore the instructions, so I have updated the rules for the security system. If this value exceeds 1.525V- CTR will automatically restart the system without user confirmation. While HYBRID OC is running, CTR will monitor the current-voltage.
That is, in this mode the maximum power saving is maintained. If the current TDC value is lower than the TDC trigger (A), PX PROFILE will automatically be disabled and the AMD Ryzen 5000 processor will go into standard boost mode.This will avoid a false shutdown of the profile if the load on the cores is pulsed. PX PROFILE has holding settings just like the other profiles.It also allows you to significantly reduce the temperature of the processor. This makes it possible to avoid frequent or false profile switching. P2 PROFILE has a higher priority than PX. P1 PROFILE has a higher priority than P2. For processors with 6, 12, or 24 cores P1 or P2 activation time is reduced by 30%. The updated HYBRID OC has a reduced profile activation time.PX PROFILE is the most sensitive, the sensor polling period is every 150ms (for P1 - 250 and for P2 – 200). Depending on the current operating profile, the sensor polling rate also changes. Since the processor very often works with a combined load of 1-6 cores, a high speed of load evaluation is needed to switch profiles as accurately as possible.Due to this maximum stability and fault tolerance are achieved. All other cores that are not in the group will run at a reduced frequency. CTR will automatically set the frequency for all recommended cores (it also happens during diagnostics).You will see the result on the PROFILES page.
We’ve copied the main improvements that come with version 2.1 of CTR below, but you’ll also want to check out Bubliy’s slides for other specifics, such as a redesigned profile system with new functions and usability updates. It provides a stable, fixed, and effective frequency that isn’t affected by any limits-no EDC throttling, temperature throttling, or stretching.
#Ryzen ctr 2.1 series
The latest rendition, version 2.1, allows Ryzen 5000 Series owners to easily and safely boost their Zen 3 processors all the way to 5.0 GHz by leveraging a new “PX” profile that is 25 mV lower than the standard voltage (1.45 vs.
#Ryzen ctr 2.1 software
Yuri Bubliy (1usmus) has released a new version of his popular software tool, Clock Tuner for Ryzen.
0 kommentar(er)
